How it's worked out
- This is a steady-state estimate: it ignores heat from the batteries themselves and the thermal mass of the cells, which slows cooling overnight.
- It assumes the whole box is insulated to the same thickness; gaps, lids and cable entries lose more.
- A thermostat means the heater only runs part of the time, so real energy use is usually lower than the continuous figure.
Typical results (60 × 40 × 30 cm box, 5 °C inside)
| Insulation | Outside | Heat loss |
|---|---|---|
| 50 mm PIR | −5 °C | About 4.8 W |
| 50 mm PIR | −10 °C | About 7.1 W |
| 25 mm EPS | −10 °C | About 23 W |
See the batteries in cold weather guide and the BMS guide.
Frequently asked questions
How much power does it take to keep a battery warm?
In a well-insulated box, often only a few watts. A 60 × 40 × 30 cm box with 50 mm PIR loses about 7 W when it's −10 °C outside and 5 °C inside.
What temperature should I keep lithium batteries at?
Above the maker's minimum charging temperature, often 0 °C, and 5 °C for some batteries.
Is insulation or a heater more important?
Insulation first: it cuts the heat needed, so a small heater can do the job.