Cordless tool batteries as emergency power
How much energy they hold, USB adaptors, lights, fans, radios and heated clothing, small inverters, charging tool batteries, safety, and a power cut kit.
By Michael Johnson · Updated 18 November 2026 · How we check our guides
If you own cordless power tools, you probably already have a useful stock of emergency power: several lithium battery packs of 18 V (or 20 V "max" in the US) and 2–12 Ah each. With the right adaptor, those packs can charge phones, run USB lights and fans, power a router or radio, and even run small mains devices through a small inverter. This guide covers how much energy tool batteries hold, USB adaptors from the tool makers, lights, fans, radios and heated jackets, small inverters, charging tool batteries from solar or a car, safety, and building a power cut kit around one battery platform.
1. How much energy they hold
| Pack | Energy | About the same as |
|---|---|---|
| 12 V 2 Ah | 24 Wh | A 6,500 mAh power bank |
| 18 V 2 Ah | 36 Wh | A 10,000 mAh power bank |
| 18 V 5 Ah | 90 Wh | A 25,000 mAh power bank |
| 18 V 12 Ah | 216 Wh | A small power station |
| 36 V or 54 V packs | Higher | Check the label in Wh |
Power bank mAh figures are at 3.7 V. See the mAh to Wh calculator.
2. USB adaptors
- Most major tool brands sell an adaptor that clips onto a battery and provides USB-A or USB-C outputs; some support USB-C Power Delivery for laptops.
- Some can also charge the tool battery from USB-C.
- Third-party adaptors are common; choose ones with proper low-voltage cut-off to protect the pack.
- See the USB-C charging guide.
3. Lights, fans, radios and heated clothing
- Cordless work lights and area lights run for many hours on a single pack. See the lighting calculator.
- Cordless fans help in heatwaves. See the keeping cool guide.
- Jobsite radios give news in a power cut. See the emergency radio guide.
- Heated jackets and blankets from some brands run on tool batteries. See the low-power heating guide.
4. Small inverters
- Small inverters for tool batteries (often 150–300 W) can run a router, laptop charger or small light.
- They're inefficient for tiny loads; use USB or 12 V outputs where possible.
- High loads drain packs quickly and may trip the battery's protection.
5. Charging tool batteries
- Use the maker's charger, from mains, a power station, an inverter or a generator.
- Some makers offer 12 V vehicle chargers.
- Charge at room temperature; lithium packs don't like being charged when very cold.
- Store packs part-charged in a cool, dry place for long periods, and top them up every few months.
6. Safety
- Don't use damaged, swollen or dropped packs that have been cracked.
- Avoid cheap counterfeit packs and chargers.
- Don't charge packs unattended overnight or near escape routes.
- Recycle old packs properly. See the battery recycling guide and the lithium battery safety guide.
7. A power cut kit
- Two or three large packs, kept charged.
- A USB adaptor (ideally with USB-C PD).
- An area light and a fan.
- A radio that runs on the same packs.
- A 12 V vehicle charger if available.
8. Frequently asked questions
Can I charge my phone from a power tool battery?
Yes, with a USB adaptor made for your tool brand. An 18 V 5 Ah pack can charge a phone several times.
How many watt-hours is an 18 V 5 Ah battery?
About 90 Wh (18 × 5).
Can a tool battery run a router?
Yes, through a USB-C PD adaptor with a suitable cable, or a small inverter. A 10–15 W router runs for several hours on a 5 Ah pack.
9. Sources
- DeWALT, 18V XR USB Power Delivery charger (DCB094): dewalt.co.nz
- DeWALT, 12–18V XR USB charger (DCB090): dewalt.com.au
- West London Waste Authority, battery fires in bin lorries and recycling centres: westlondonwaste.gov.uk
New to some of the terms? See the glossary. Not sure where to start? Try start here.