How it's calculated
Moisture is on a wet basis (the share of the log's weight that is water), which is what most moisture meters display.
Heat per cord and per cubic metre (20% moisture)
| Wood | Density (oven-dry, kg/m³) | kWh per stacked m³ | kWh per full cord | Million BTU per cord |
|---|---|---|---|---|
| Oak | 560 | 1,839 | 6,791 | 23.2 |
| Ash | 560 | 1,839 | 6,791 | 23.2 |
| Beech | 560 | 1,839 | 6,791 | 23.2 |
| Birch | 510 | 1,675 | 6,185 | 21.1 |
| Sugar maple / hard maple | 560 | 1,839 | 6,791 | 23.2 |
| Hickory | 640 | 2,102 | 7,761 | 26.5 |
| Cherry | 500 | 1,642 | 6,063 | 20.7 |
| Red gum (Australia) | 700 | 2,299 | 8,489 | 29.0 |
| Ironbark (Australia) | 900 | 2,956 | 10,914 | 37.2 |
| Douglas fir | 450 | 1,478 | 5,457 | 18.6 |
| Larch | 460 | 1,511 | 5,578 | 19.0 |
| Pine | 420 | 1,379 | 5,093 | 17.4 |
| Spruce | 380 | 1,248 | 4,608 | 15.7 |
| Poplar / aspen | 350 | 1,150 | 4,244 | 14.5 |
| Willow | 340 | 1,117 | 4,123 | 14.1 |
Figures are for the wood itself. Multiply by your stove's efficiency for useful heat. Densities vary within a species by 10–20%.
Seasoning times
- Split, stacked off the ground, top covered and sides open to the wind.
- Most hardwoods: 1–2 years; oak can take 2 years or more. Softwoods: 6–12 months.
- Kiln-dried wood is ready immediately.
Compare wood with other fuels in the heating fuel cost calculator, and see the wood burner guide for clean burning and smoke control rules.
Frequently asked questions
How many kWh are in a cord of wood?
A full cord of seasoned oak (20% moisture) holds roughly 6,500–7,000 kWh, about 22–24 million BTU. Softwoods like pine hold around 5,000 kWh.
How many kWh in a cubic metre of logs?
A stacked cubic metre of seasoned oak, ash or beech holds about 1,800 kWh; a loose (thrown) cubic metre about 1,250–1,300 kWh.
Does wet wood give less heat?
Yes. Wood at 50% moisture gives less than half the heat per kg of wood at 20%, and much of what's left goes up the chimney as steam and smoke.