How it's worked out
- Most of the time a radio is listening, so receive current matters as much as transmit current. Turn off backlights, scanning and preamps you don't need.
- Transmit current rises steeply with power: halving the power roughly halves the current on many rigs.
- Digital modes (FT8, JS8Call, Winlink) send a lot of data per watt-hour, but have a high duty cycle while active, so run them at reduced power.
- Lead-acid voltage sags under 20 A loads; most 13.8 V rigs work down to about 11.7 V.
Typical figures
| Radio | Receive | Transmit | 10% duty, average |
|---|---|---|---|
| HF rig at 100 W | 1.5 A | 20 A | About 3.4 A |
| QRP HF rig at 5 W | 0.25 A | 2 A | About 0.4 A |
| Mobile VHF/UHF at 50 W | 0.8 A | 10 A | About 1.7 A |
| Handheld at 5 W | 0.2 A | 1.8 A | About 0.36 A |
For using radio in an emergency, licences and how to get started, see the amateur radio for emergencies guide. To keep the battery topped up, use the solar panel size calculator.
Frequently asked questions
How long will a 100Ah battery run a 100W HF radio?
At 10% transmit (about 3.4 A average), a 100 Ah LiFePO4 battery gives roughly 27 hours of operating, or four to five days at six hours a day.
What battery is best for portable amateur radio?
LiFePO4: it holds a steady voltage under transmit loads, gives 80–100% of its capacity and is about half the weight of lead-acid.
How much current does a handheld radio draw?
Typically 0.1–0.3 A receiving and 1.5–2 A transmitting at 5 W from a 7.4 V pack.