Draught-proofing and insulation for resilience
Why it matters, finding draughts, doors, windows, floors and loft hatches, chimneys, ventilation to keep, quick wins for a cold snap, loft and pipe insulation, a warm room, and help with costs.
By Michael Johnson · Updated 18 November 2026 · How we check our guides
A warm home is a resilient home. The better a house holds its heat, the longer it stays bearable when the heating stops in a power cut, the less fuel you need when supplies are short, and the lower your bills the rest of the time. Draught-proofing and simple insulation are among the cheapest home improvements, many are DIY jobs costing a few pounds, and they make a noticeable difference within a day. This guide covers finding draughts, sealing doors, windows, floors and chimneys, keeping ventilation safe, quick wins with curtains and radiators, loft and pipe insulation, and creating a "warm room" for emergencies.
1. Why it matters for resilience
- A well-sealed, insulated home cools far more slowly when the heating stops: a matter of a day or two to get cold, rather than hours.
- It needs less fuel, so stored oil, LPG, wood or battery power last longer.
- Backup heaters and low-power heating become more effective.
- See how quickly your home cools with the house cool-down calculator.
2. Finding draughts
- On a windy day, move a damp hand, a feather or a lit incense stick (carefully) around doors, windows, skirting, floorboards, loft hatches, letterboxes, keyholes, pipe holes and sockets on outside walls.
- Look for gaps of light around doors at night.
- A cheap thermal camera attachment for a phone shows cold spots clearly.
3. Doors
- Gaps round the frame: self-adhesive foam or rubber strips, or brush or wiper strips for a better seal.
- Gap at the bottom: a brush or rubber draught excluder fixed to the door, or a fabric "sausage".
- Letterbox: a brush or flap insert.
- Keyhole: a cover plate.
- Internal doors: keep doors to unused rooms shut; a heavy curtain over the front door helps a lot.
- Don't fit draught strips to fire doors in flats without checking they don't stop them closing. See fire safety in flats.
4. Windows
- Fit foam or rubber strips to opening casements; use silicone sealant for gaps around frames.
- Sash windows: brush strips and secondary seals; specialist sash draught-proofing is effective.
- Secondary glazing film (cling film-style kits applied with tape and a hairdryer) cuts heat loss from single-glazed windows cheaply, but keep at least one window openable for ventilation and escape.
- Thick, lined curtains, closed at dusk, make a big difference; tuck them behind radiators rather than over them.
- Thermal blinds and even bubble wrap on glass help in a crisis.
5. Floors, skirting and loft hatches
- Fill gaps between floorboards and under skirting with flexible filler or sealant (suspended timber floors need ventilation underneath via air bricks, so seal from above only).
- Rugs and carpets reduce heat loss through floors.
- Seal and insulate the loft hatch with foam strip and an insulation board on top.
- Seal gaps where pipes and cables go through walls and floors.
6. Chimneys and fireplaces
- An unused open chimney is a big draught. A removable chimney balloon or a cap at the top stops it.
- Leave a little ventilation to prevent damp in the flue, follow the product instructions, and always remove a balloon before lighting a fire.
- Don't block flues serving working appliances.
7. Ventilation you must keep
- Vents for gas fires, boilers, open-flued appliances and solid fuel stoves.
- Air bricks under suspended floors.
- Trickle vents in windows and extractor fans in kitchens and bathrooms.
- Open windows briefly each day to let moisture out, especially if drying clothes indoors. See the indoor air quality guide.
- Fit a carbon monoxide alarm in every room with a fuel-burning appliance.
8. Quick wins for a cold snap
- Close curtains at dusk and open them on sunny days.
- Fit radiator reflector panels (or kitchen foil on card) behind radiators on outside walls.
- Move furniture away from radiators.
- Block draughts with rolled towels and blankets.
- Close doors to unused rooms.
- Bleed radiators so they heat fully.
9. Insulation: loft, pipes and cylinder
- Loft insulation: the recommended depth for mineral wool is 270 mm. Topping up from a thin layer is a cheap, effective DIY job (wear gloves and a mask, and don't block eaves ventilation or cover cables and downlights carelessly).
- Pipe lagging on hot water pipes saves heat; on pipes in lofts, garages and outside walls it helps stop freezing. See the snowed in guide.
- Hot water cylinder jacket: at least 75 mm thick if the cylinder isn't factory-foamed.
- Cavity wall and solid wall insulation are bigger jobs; check grants.
- Use the insulation R-value calculator.
10. Making a warm room
- Choose a small room, ideally south-facing, with few outside walls and windows.
- Draught-proof it thoroughly; hang blankets over doors and windows at night.
- Bring everyone (and pets) into it; body heat adds up.
- Use backup heating safely in this room only. See keeping warm in a power cut and low-power heating.
11. Renters and help with costs
- Most draught-proofing products are removable and don't damage the property; check with your landlord for anything permanent.
- Landlords must meet minimum energy efficiency standards and fix serious damp and cold hazards.
- Grants and free measures may be available through energy company schemes, councils and devolved government schemes. Check with your council or an energy advice service.
- See the renters guide and the heating cheaply guide.
12. Frequently asked questions
Is draught-proofing worth it?
Yes. It's one of the cheapest ways to keep a home warmer and cut bills, and helps the house stay warm longer in a power cut.
Can draught-proofing cause damp?
Only if you block ventilation. Seal uncontrolled gaps, but keep vents, air bricks and extractor fans clear and air rooms daily.
How thick should loft insulation be?
The usual recommendation for mineral wool is 270 mm.
13. Sources
- Energy Saving Trust, winter-proof your home and your energy bill: energysavingtrust.org.uk
- Energy Saving Trust, energy efficient DIY projects: energysavingtrust.org.uk
- Department of Energy and Climate Change, draught proofing factsheet: gov.uk
New to some of the terms? See the glossary. Not sure where to start? Try start here.