How it's worked out
- A 13 A lead at 230 V can supply about 3,000 W in total, however many sockets it has.
- Cable reels must be fully unwound for anything more than a small load; wound reels have a much lower rating, shown on the label.
- Rating plates show maximum power; many appliances draw less most of the time, but heaters and kettles draw their full rating.
Typical results (230 V, 13 A lead)
| Appliances | Total | Current | Result |
|---|---|---|---|
| TV, laptop, lamp (100 + 60 + 10 W) | 170 W | 0.7 A | Fine |
| Kettle and toaster (2,200 + 900 W) | 3,100 W | 13.5 A | Overloaded |
| Fan heater and kettle (2,000 + 2,200 W) | 4,200 W | 18.3 A | Overloaded |
See the extension leads safety guide and the watts to amps calculator.
Frequently asked questions
How many watts can a UK extension lead take?
A 13 A lead can supply about 3,000 W in total at 230 V, or less if it's rated lower.
Can I plug a kettle and toaster into the same extension lead?
Usually not: together they often exceed 13 A. Plug high-power appliances into wall sockets.
Why must cable reels be unwound?
A wound cable can't lose heat, so it can overheat and melt even at loads below its normal rating.