Home › Guides › Firewood

Firewood: seasoning, storing and burning it well

Why dry wood matters, the Ready to Burn rules, which wood burns best, buying firewood, seasoning your own, building a log store, measuring moisture, kindling, how much you need, firewood for emergencies, and chimney safety.

By Michael Johnson · Updated 18 November 2026 · How we check our guides

A wood burner is one of the most reliable sources of heat in a power cut, but only if you have a good stock of dry wood. Wet wood gives less heat, smokes, tars up the chimney (a fire risk) and pollutes the air, and since 2021 it's been illegal to sell small quantities of wet wood in England. This guide covers how much wood you need, buying it, seasoning your own, storing it, measuring moisture, kindling and firelighters, safety and chimney care, and how firewood fits into an emergency plan.

How much heat is in your log pile? The firewood energy calculator works out the energy in your wood by species and moisture, and the heating fuel cost calculator compares it with other fuels.
Related: see the garden bonfires guide.

1. Why dry wood matters

2. The law: Ready to Burn

3. Which wood burns best

WoodNotes
AshExcellent; burns well with a relatively low moisture content when fresh; seasons quickly
OakVery dense, long burning; needs two years or more to season
BeechExcellent once seasoned
BirchGood, burns fast and hot; season well as bark holds moisture
Hawthorn and fruit woodsVery good, pleasant smell
Softwoods (pine, spruce, larch)Light, burn fast and can spit; good for kindling and getting fires going
Willow and poplarPoor: low density, burn quickly

Per kilogram of dry wood, hardwoods and softwoods give similar energy; hardwoods are simply denser, so a log of hardwood holds more heat than the same size of softwood.

4. Buying firewood

5. Seasoning your own

  1. Cut and split early: late winter or spring is ideal. Split logs dry much faster than rounds; aim for pieces about 10–15 cm across.
  2. Stack off the ground on pallets or rails, in single rows, with gaps for air.
  3. Cover the top, leave the sides open: wind and sun do the drying; rain on the top of the stack slows it.
  4. Choose a sunny, breezy spot, away from walls that block airflow.
  5. Wait: hardwoods usually need about 18 months to two years; softwoods and ash dry faster.
  6. Measure before burning (see below).

6. Building a log store

7. Measuring moisture

8. Kindling and firelighters

9. How much wood you need

UseRoughly per winter
Occasional evenings (a few fires a week)1–2 m³ stacked
Daily evening fires3–4 m³ stacked
Main heating for a small home6–10 m³ stacked or more

A stacked cubic metre of seasoned hardwood weighs roughly 350–500 kg and holds very roughly 1,500–2,000 kWh of heat. Work out yours with the firewood energy calculator.

10. Firewood for emergencies

11. Safety and chimney care

12. Frequently asked questions

How long does firewood need to season?

Hardwood usually needs about 18 months to two years, split and stacked off the ground with the top covered. Measure it: it should read 20% moisture or less.

Is it illegal to burn wet wood?

In England, it's illegal to sell wood under 2 m³ that isn't Ready to Burn (20% moisture or less). Burning wet wood at home isn't itself an offence outside Smoke Control Areas, but it's inefficient and causes tar build-up and pollution.

How do I check if my wood is dry enough?

Split a log and use a moisture meter on the fresh face. 20% or less is ready to burn.

How much firewood do I need for a winter?

About 3–4 stacked cubic metres for daily evening fires; much more if the stove is your main heating.

13. Sources

  1. HETAS, how to season firewood: hetas.co.uk
  2. HETAS, Ready to Burn: what you need to know: hetas.co.uk
  3. Woodsure, using cleaner fuels for domestic burning: woodsure.co.uk

New to some of the terms? See the glossary. Not sure where to start? Try start here.