Home › Guides › No water from the taps

No water from the taps: what to do when supply fails

The first hour, why supplies fail, how much water you need, flushing toilets without running water, keeping clean, bottled water stations, boilers and cylinders, when water returns, your rights and compensation, and preparing.

By Michael Johnson · Updated 18 November 2026 · How we check our guides

Turning on the tap and getting nothing is more common than most people think. In January 2026, burst pipes and power cuts after Storm Goretti left around 25,000 homes in Kent and Sussex without water for four days or more, with bottled water stations set up in Tunbridge Wells, East Grinstead and Maidstone. Freezes, thaws, burst mains, drought, power failures at pumping stations and contamination can all cut supplies. This guide covers what to do in the first hour, how much water you really need, flushing toilets and keeping clean without running water, bottled water stations, your rights and compensation, and preparing so a supply failure doesn't become a crisis.

Work out what you need: the no water supply calculator adds up drinking, cooking, washing and toilet flushing for your household, and the emergency water calculator sizes your drinking water store.

1. The first hour

  1. Check it's not just you: ask a neighbour, and check your stop tap is open. If only your home is affected, you may have a frozen or burst pipe; see the snowed in guide.
  2. Check your water company's website or social media for incidents and expected restoration times; enter your postcode.
  3. Save what you have: don't flush unnecessarily, and keep any water in the kettle, the cold water tank in the loft (if you have one) and the hot water cylinder for later.
  4. Turn off appliances that use water (washing machine, dishwasher) so they don't fill with air or dirty water.
  5. Check on vulnerable neighbours, and register with your water company's Priority Services Register if you need deliveries.

2. Why supplies fail

3. How much water you need

UsePer person per day
DrinkingAbout 2–3 litres (more in heat, for breastfeeding or when ill)
Cooking and hot drinksAbout 1 litre
Basic washing (strip wash, teeth, hands)About 2–5 litres
Washing upAbout 2–3 litres per household meal
Toilet flushing (bucket flush)About 4–9 litres per flush

Drinking and cooking need clean bottled or treated water. Washing and flushing can use rainwater or stored tap water. Work out your household total with the no water supply calculator.

4. Flushing toilets without running water

5. Keeping clean

6. Bottled water stations and deliveries

7. Boilers, cylinders and appliances

8. When the water comes back

9. Your rights and compensation

10. Preparing in advance

11. Frequently asked questions

How do I flush my toilet when the water is off?

Pour a bucket of about 4–9 litres of water quickly into the bowl, or fill the cistern and flush normally. Use rainwater or saved washing water.

Am I entitled to compensation if my water goes off?

In England, if an unplanned interruption from a burst main lasts more than 12 hours, households are due £50, plus £50 for each further full 12-hour period.

Can I drink water from my hot water cylinder?

Not normally. Use it for washing and flushing. Drink bottled or boiled water.

How much water should I store for a supply cut?

At least 3 litres of drinking water per person per day for three days, plus 20–50 litres of non-drinking water for flushing and washing.

12. Sources

  1. Rayo / Hits Radio, 25,000 homes still without water in Kent and Sussex (January 2026): hellorayo.co.uk
  2. Consumer Council for Water, what standards are guaranteed by water and sewerage companies?: ccw.org.uk
  3. Thames Water, boil water notice: thameswater.co.uk
  4. Met Office, what to do if you have a frozen or burst pipe: metoffice.gov.uk

New to some of the terms? See the glossary. Not sure where to start? Try start here.