Home › Guides › Private water supplies

Private water supplies: boreholes, wells and power cuts

Types of private supply, power cuts and pumps, storage, protecting the source, treatment, after flooding, drought and low yield, freezing weather, and testing and your council.

By Michael Johnson · Updated 18 November 2026 · How we check our guides

About 1% of people in England and Wales, and a higher share in Scotland and rural Wales, get their water from a private supply: a borehole, well, spring or stream, rather than a water company. Private supplies give independence, but they also make you your own water company. In a power cut, an electric borehole pump stops and the taps run dry within hours. In floods, wells and springs can be contaminated with sewage and farm run-off. In drought, springs and shallow wells can fail. This guide covers keeping water flowing in power cuts, protecting supplies from contamination, treatment, what to do after flooding, testing, drought, and the role of your council.

After flooding or any change in taste, colour or smell: don't drink the water until it has been tested or properly treated. Boil water for drinking, cooking and brushing teeth, or use bottled water, and contact your council's environmental health team.

1. Types of private supply

SourceTypical risks
Borehole (deep, drilled)Usually the best quality; pump failure, minerals, occasional contamination
Shallow wellContamination from surface water, septic tanks and livestock; drying up
SpringContamination after heavy rain; flow drops in drought
Stream or riverHighest contamination risk; needs thorough treatment
Shared supplyShared responsibility for maintenance and costs; agree in writing who does what

2. Power cuts and pumps

Most boreholes and many wells use an electric submersible pump, often with a pressure vessel or a header tank. When the power goes:

Options for keeping water flowing:

Report power cuts to 105, and if you rely on water for medical needs, join the Priority Services Register.

3. Storage for resilience

4. Protecting the source

The Drinking Water Inspectorate recommends, among other measures:

5. Treatment

6. After flooding

  1. Assume the supply is contaminated. Use bottled or boiled water for drinking, food preparation, brushing teeth and making up baby feeds. See the boil water guide.
  2. Don't use water treatment equipment that was flooded until it's been checked and cleaned; electrical parts need checking before use.
  3. Contact your council's environmental health team: they can advise on testing and disinfecting the supply.
  4. Wells and boreholes may need pumping out and disinfecting (shock chlorination) by a specialist.
  5. Replace filters and the UV lamp, and clean storage tanks.
  6. Only go back to normal use after a satisfactory test.

7. Drought and low yield

8. Freezing weather

9. Testing and your council

10. Frequently asked questions

Will my borehole work in a power cut?

Not if the pump is electric. You'll have only what's in your pressure vessel or header tank, unless you have a generator, battery system or hand pump.

What size generator do I need for a borehole pump?

Pumps have a high starting surge, often three times or more their running power. Check the pump's rating and size the generator for the surge.

Is my private water safe after flooding?

Assume not. Use bottled or boiled water and contact your council for testing advice before returning to normal use.

11. Sources

  1. Drinking Water Inspectorate, private water supplies: dwi.gov.uk
  2. Drinking Water Inspectorate, protecting your private water supply: dwi.gov.uk
  3. Herefordshire Council, flooding information for users with a private water supply: herefordshire.gov.uk

New to some of the terms? See the glossary. Not sure where to start? Try start here.