Passive solar design
How passive solar gain works, orientation and glazing, thermal mass, insulation and airtightness, shading and overheating, ventilation, sunspaces, and existing homes.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
Before you add solar panels or a heat pump, the building itself can collect, store and keep heat from the sun, and keep cool in summer. That's passive solar design: using orientation, windows, thermal mass, insulation, shading and ventilation so the building heats and cools itself as much as possible. It's most powerful when building new or extending, but many principles help existing homes, cabins and outbuildings too. This guide explains how passive solar gain works, orientation and glazing, thermal mass, insulation and airtightness, shading and overheating, ventilation, sunspaces and conservatories, and applying the ideas to existing homes.
1. How passive solar gain works
- Sunlight passes through glass and warms floors, walls and furniture, which release the heat into the room.
- Winter sun is low, so it shines deep into south-facing rooms; summer sun is high and can be shaded with overhangs.
- Good insulation keeps collected heat inside; thermal mass stores it into the evening.
2. Orientation and glazing
- In the UK, the main glazing should face roughly south (within about 30° of due south) for the best winter gain.
- Keep north-facing windows smaller, and limit east and especially west glazing, which causes overheating on summer afternoons.
- Choose glazing with a good balance of low heat loss (U-value) and high solar gain (g-value) for south windows.
- Living spaces on the south side; utility rooms, stairs and storage on the north.
- Check winter shading from neighbouring buildings and trees. See the daylight hours calculator.
3. Thermal mass
- Dense materials such as concrete, stone, brick, tiles and earth store heat and smooth out temperature swings.
- Mass works best where direct sun falls on it: a tiled or concrete floor in a south room, or an internal masonry wall.
- Mass must be inside the insulation, not outside it.
- Too much mass without enough solar gain or heating can make a building slow to warm.
- Earth-sheltered and earth-built homes use mass heavily. See the earthship guide and the straw bale and cob guide.
4. Insulation and airtightness
- Passive gain is only useful if the building keeps the heat: high insulation levels and good airtightness are essential.
- Insulated curtains or shutters reduce heat loss through glass at night.
- See the insulation guide and the U-value converter.
5. Shading and overheating
- Fixed overhangs or brise-soleil above south windows block high summer sun but let in low winter sun.
- External blinds, shutters and deciduous trees or climbers are effective; internal blinds are less so.
- West-facing glass is the biggest overheating risk; shade it externally.
- In England, new homes must now be designed to limit overheating under Building Regulations Part O (in force since 2022).
6. Ventilation and cooling
- Windows on opposite sides allow cross-ventilation; high and low openings allow stack ventilation.
- Night-time ventilation cools thermal mass, ready to absorb heat the next day.
- Airtight homes need controlled ventilation, such as mechanical ventilation with heat recovery, to maintain air quality.
- See the keeping cool guide and the condensation guide.
7. Sunspaces and conservatories
- A sunspace collects heat by day that can be let into the house, and is closed off at night.
- Unheated conservatories can be useful buffer spaces, but if heated, they lose a lot of energy.
- Keep a door between the sunspace and the house, and ventilate it well in summer.
- A greenhouse on a south wall can work similarly. See the polytunnel and greenhouse guide.
8. Existing homes
- Open curtains on south windows on sunny winter days, close them at dusk.
- Keep south-facing windows clear of clutter and keep floors under them uncovered (tiles rather than thick carpet) where practical.
- Prune trees that block winter sun, but keep summer shading where useful.
- Add external shading to west windows.
- When extending, put glazing and living space on the south side.
9. Frequently asked questions
What is passive solar design?
Designing a building to collect, store and keep heat from the sun, and to stay cool in summer, using orientation, glazing, thermal mass, insulation, shading and ventilation.
Does passive solar work in the UK?
Yes, especially with good insulation. Low winter sun reaches deep into south-facing rooms, and shading prevents summer overheating.
What is thermal mass?
Dense materials like concrete, stone and brick that absorb heat and release it slowly, smoothing out temperature swings.
10. Sources
- GreenSpec, passive solar design: direct solar gain: greenspec.co.uk
- Bath and North East Somerset Council, passive design (sustainable construction guidance): bathnes.gov.uk
- Self-Build, solar gain, thermal mass and sustainable design: self-build.co.uk
- Homebuilding and Renovating, ways to prevent overheating in homes: homebuilding.co.uk
New to some of the terms? See the glossary. Not sure where to start? Try start here.