Home › Guides › Rainwater harvesting

Rainwater harvesting

How much you can collect, uses, water butts, larger tanks and IBCs, whole-house systems, keeping water clean, drinking rainwater, emergencies, winter and maintenance, and regulations.

By Michael Johnson · Updated 18 November 2026 · How we check our guides

A typical UK roof catches tens of thousands of litres of rain a year, most of which goes straight down the drain. Collecting even a fraction gives you free water for the garden, flushing toilets, washing cars and clothes, and, crucially, a reserve when the mains fails or a hosepipe ban hits. This guide covers how much water you can collect, simple water butts, larger tanks and whole-house systems, using rainwater safely, treating it, winter and maintenance, and the rules. It complements the rainwater harvesting calculator.

Quick estimate: annual yield in litres ≈ roof area (m²) × annual rainfall (mm) × 0.8. A 100 m² roof in an area with 660 mm of rain collects about 52,800 litres a year: around 145 litres a day on average, enough for most toilet flushing and the garden.

1. How much can you collect?

Yield (litres a year) = roof plan area (m²) × rainfall (mm) × run-off factor (about 0.8)
Roof area600 mm a year (dry east)1,000 mm a year1,500 mm a year (wet west)
10 m² (shed)4,800 L8,000 L12,000 L
50 m²24,000 L40,000 L60,000 L
100 m² (house)48,000 L80,000 L120,000 L

Use the plan area (the footprint the roof covers), not the sloping area. Rain falls unevenly, so tank size limits how much you can actually store. Every millimetre of rain on 1 m² gives 1 litre.

2. What rainwater is good for

3. Water butts

4. Larger tanks and IBCs

5. Whole-house systems

6. Keeping water clean

7. Can you drink rainwater?

Not without proper treatment. Rainwater picks up bacteria from bird and animal droppings on roofs, plus dust, leaves and sometimes pollutants. For drinking, it needs filtration and disinfection (for example sediment and carbon filters plus UV), with regular testing. In an emergency, boil it for at least a minute or use a good filter. See the water filters guide and the boil water guide.

8. Rainwater in an emergency

9. Winter and maintenance

10. Rules and regulations

11. Frequently asked questions

How much rainwater can I collect from my roof?

Roughly roof area (m²) × annual rainfall (mm) × 0.8 litres a year. A 100 m² roof with 660 mm of rain gives about 52,800 litres.

Is rainwater safe to drink?

Not untreated. It can contain bacteria from bird and animal droppings. Boil or filter it in an emergency, and use proper treatment for regular drinking.

Can I use rainwater to flush toilets?

Yes, by bucket in an emergency, or permanently through a rainwater harvesting system with separate pipework.

12. Sources

  1. Homebuilding & Renovating, rainwater harvesting: homebuilding.co.uk
  2. Self-Build, rainwater harvesting explained: self-build.co.uk
  3. RHS, collecting, storing and reusing water: rhs.org.uk

New to some of the terms? See the glossary. Not sure where to start? Try start here.