Solar site survey and shading
How the sun moves, how shade affects output, measuring shading, tools, what else to record, turning it into an estimate, and dealing with shade.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
The best solar panels in the world produce little in shade. Before buying anything, a simple site survey tells you where panels will actually get sun, especially in winter when the sun is low and every hour counts. This guide explains how the sun moves through the year in the UK, how to judge shading from trees, buildings and hills, simple measuring methods and tools, what else to record (roof, structure, cable runs and equipment locations), and how to turn the survey into a realistic estimate.
1. How the sun moves
- Midday sun height ≈ 90° − your latitude ± up to 23.4° (higher in June, lower in December).
- At 52° N: about 61° at midsummer midday, about 38° at the equinoxes and about 15° at midwinter.
- In summer the sun rises in the north-east and sets in the north-west; in winter it rises in the south-east and sets in the south-west, giving only around 7–8 hours of daylight in southern England and less further north.
- See the daylight hours calculator and the winter solar guide.
2. How shade affects output
- Shading even part of one panel in a series string can pull down the whole string, though bypass diodes limit the loss.
- Soft shade (thin branches, distant haze) costs less than hard shade (a chimney or vent pipe directly across cells).
- Winter shading matters most for off-grid systems, which need every winter hour; for grid-tied systems, summer production dominates the annual total.
- See the microinverters and optimisers guide.
3. Measuring shading
- Stand where the panels will go and face south.
- For each obstacle, measure or estimate its height above panel level and its distance away.
- Its elevation angle ≈ inverse tangent of (height ÷ distance). A 10 m tree 20 m away rises about 27° above the horizon.
- If that angle is above the sun's height for the times and months you care about, it will shade the panels then.
- Repeat for obstacles to the south-east and south-west, which shade mornings and afternoons.
- Remember trees grow, and deciduous trees still shade a little in winter with bare branches.
4. Tools
- PVGIS (European Commission) estimates output for any UK location, includes the terrain horizon, and lets you enter your own horizon profile.
- Phone apps showing sun paths overlaid on the camera view make a quick check easy.
- A clinometer or angle app, plus a compass (allowing for magnetic variation), is enough for a careful manual survey.
- Photos from the panel position at different times of year are invaluable.
5. What else to record
| Item | Why |
|---|---|
| Roof orientation and pitch | Affects output. See the tilt and orientation guide |
| Usable area, vents, chimneys, roof windows | Decides panel layout. See the roof fit calculator |
| Roof condition and structure | Fix the roof first; panels last 25 years or more |
| Cable route to inverter or controller | Length affects cable size |
| Inverter and battery location | Space, ventilation and fire safety. See the battery location guide |
| Planning constraints | Listed buildings, conservation areas. See the planning guide |
| Access for installation and cleaning | Scaffolding, ladders, ground mounts |
6. Turning it into an estimate
- Run PVGIS with your location, tilt, orientation and horizon to get monthly figures.
- Look at the worst month for off-grid sizing, and the annual total for grid-tied payback.
- Use the solar panel output calculator and off-grid system calculator to check the system size.
7. Dealing with shade
- Move panels: a ground mount or a different roof face may avoid the worst shade.
- Trim trees where you're allowed to (check tree preservation orders and conservation areas, and avoid the bird nesting season).
- Split shaded panels into a separate string or use panel-level electronics.
- Go steeper for winter sun over low obstacles, or mount vertically on a wall.
8. Frequently asked questions
How do I know if a tree will shade my solar panels in winter?
Work out its angle above the horizon from the panel position (inverse tangent of height ÷ distance). If it's higher than the low winter sun, around 15° at midday in December in central England, it will shade the panels.
What's the best free tool for a UK solar estimate?
PVGIS from the European Commission covers the UK, includes terrain shading and gives monthly output.
Does a little shade matter?
It can, especially on a series string. Even a vent pipe across one panel can cut string output noticeably at certain times.
9. Sources
- European Commission, PVGIS online tool: ec.europa.eu
- European Commission, PVGIS user manual: ec.europa.eu
- Sunsave, solar panel shading: sunsave.energy
- US Department of Energy, planning a home solar electric system: energy.gov
New to some of the terms? See the glossary. Not sure where to start? Try start here.