Microinverters and power optimisers
Three approaches, how shading affects strings, power optimisers, microinverters, a comparison, batteries and backup, reliability and access, and off-grid systems.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
With a traditional string inverter, panels are wired together in series, so shade on one panel can drag down the whole string. Microinverters and power optimisers fix this by working panel by panel. They can squeeze more energy from shaded or complicated roofs, give panel-level monitoring, and improve safety by reducing high-voltage DC on the roof. They also cost more and add electronics on the roof. This guide explains how string inverters, optimisers and microinverters differ, when panel-level electronics pay off, batteries and backup, reliability and access, and off-grid use.
1. Three approaches
| System | How it works |
|---|---|
| String inverter | Panels in series send high-voltage DC to one inverter, which tracks the maximum power point of the whole string |
| Power optimisers | A DC-DC converter behind each panel tracks that panel's maximum power point; a string inverter still converts to AC |
| Microinverters | A small inverter behind each panel (or pair) converts to AC on the roof |
2. How shading affects strings
- In a series string, every panel carries the same current. A shaded panel's bypass diodes switch in, losing that panel's output and part of the string's voltage.
- Modern string inverters handle simple, predictable shading better than older ones by scanning for the best operating point.
- Panels facing different directions in one string are always a compromise; separate MPPT inputs or panel-level electronics avoid it.
- See the series and parallel guide and the output calculator.
3. Power optimisers
- Each panel runs at its own best point; the string's voltage is managed by the optimisers and inverter.
- Usually paired with a matching inverter brand, though some optimisers work with any inverter and can be fitted just to shaded panels.
- Panel-level monitoring shows which panel is underperforming.
- Many can reduce string voltage to a safe level when the inverter shuts down (rapid shutdown).
4. Microinverters
- Each panel produces AC independently, so one failure or shaded panel doesn't affect the others.
- No high-voltage DC strings on the roof.
- Easy to add panels later, one at a time.
- Efficiency is slightly lower at full sun than a good string inverter, but often higher overall on difficult roofs.
- Small plug-in systems often use a microinverter. See the plug-in solar guide.
5. Comparison
| String | Optimisers | Microinverters | |
|---|---|---|---|
| Cost | Lowest | Higher | Highest |
| Shading and multiple orientations | Weakest | Good | Good |
| Monitoring | System only | Per panel | Per panel |
| Electronics on the roof | None | One per panel | One per panel |
| High-voltage DC on the roof | Yes | Reduced when shut down | No |
| Battery integration | Easy with a hybrid inverter | Easy with matching hybrid | Usually AC-coupled battery |
| Expanding later | Limited by inverter | Limited by inverter | Easy |
6. Batteries and backup
- A hybrid string inverter can charge a DC battery directly from solar.
- Microinverter systems usually add an AC-coupled battery with its own inverter.
- In a power cut, grid-tied microinverters and string inverters shut down for safety; backup needs a battery system with a backup output that can also run the panels in "island" mode. See the grid-tied solar and battery guide and the backup power guide.
7. Reliability, access and warranties
- Electronics on the roof face heat and cold cycles; good brands offer warranties of 20–25 years.
- Replacing a failed unit means roof access, often with scaffolding, which can cost more than the part.
- A string inverter failure stops the whole system but is easy to reach.
- Panel-level monitoring helps spot failures quickly.
8. Off-grid and DIY systems
- Off-grid battery systems usually use MPPT charge controllers rather than grid-tie inverters. Multiple controllers can serve different orientations or shaded sections.
- Some optimisers work with off-grid controllers; check compatibility.
- See the charge controller guide and the off-grid solar guide.
9. Frequently asked questions
Are microinverters better than a string inverter?
On shaded or multi-direction roofs, often yes. On a simple, unshaded roof, a string inverter usually gives similar output for less money.
What does a power optimiser do?
It lets each panel work at its own best operating point, reducing losses from shading or mismatched panels, and gives panel-level monitoring.
Do microinverters work in a power cut?
Not on their own. Grid-tied systems shut down for safety unless paired with a battery system that provides backup.
10. Sources
- Sunsave, solar panel microinverters: are they worth it?: sunsave.energy
- Sunsave, solar panel optimisers: sunsave.energy
- EnergySage, power optimizers: what you need to know: energysage.com
- Sunsave, solar panel shading: is it a problem?: sunsave.energy
New to some of the terms? See the glossary. Not sure where to start? Try start here.