Standby power and phantom loads
What standby and phantom loads are, finding them, typical figures, what to switch off, what to leave on, inverter idle power, and managing loads automatically.
By Michael Johnson · Updated 19 November 2026 · How we check our guides
Some electricity is used around the clock by devices that seem to be off: TVs and set-top boxes on standby, chargers left plugged in, games consoles that update overnight, smart speakers, microwaves with clocks, and on off-grid systems, inverters that are switched on but idle. Each draw is small, but together they add up to a noticeable part of a home's bill, and on a battery system they can drain much of a winter day's solar. This guide explains standby and phantom loads, how to find and measure them, typical figures, what to switch off and what to leave on, inverter idle power, and managing loads automatically.
1. What standby and phantom loads are
- Standby: a device waiting for a remote control, a timer or a network signal.
- Phantom loads: power used by devices that appear off, such as plug-in power supplies with no device connected.
- Always-on loads: routers, alarms, fridges, boiler controls and smart hubs that genuinely need to run.
2. Finding them
- At night, with everything you'd normally leave running, check the live reading on your smart meter display or a clamp monitor. See the energy monitoring guide.
- Switch off circuits one at a time at the consumer unit (leaving the fridge and freezer on) to see where the load is.
- Use a plug-in power monitor on individual devices; many cheap monitors aren't accurate below a few watts.
- On a battery system, the battery monitor shows the overnight draw directly. See the battery monitoring guide.
3. Typical figures
| Device | Typical standby or idle draw |
|---|---|
| Modern TV on standby | Under 1 W (older TVs and set-top boxes much more) |
| Satellite or cable box | Several watts to 20 W+ |
| Games console in "instant on" mode | Several watts or more |
| Router and broadband equipment | 5–15 W (always on) |
| Smart speaker | 2–4 W |
| Microwave or oven clock | 1–3 W |
| Desktop computer asleep | 1–5 W; left on, much more |
| Inverter switched on, no load | Several watts to 30 W+, depending on size |
Figures vary widely; measure your own.
4. What to switch off
- TV, set-top box, sound bar and games console at the wall, ideally with one switched extension lead.
- Chargers and power supplies when not charging.
- Computers, printers and monitors when not in use.
- Second fridges and freezers that are mostly empty.
- Check set-top boxes don't miss updates or recordings if switched off.
5. What to leave on
- Fridges and freezers.
- Smoke and carbon monoxide alarms, burglar alarms and telecare.
- Boiler and heating controls, and medical equipment.
- The router, if you rely on a digital phone line. See the digital landline guide.
6. Inverter idle power
- A large inverter left on with nothing running can use more energy overnight than the lights.
- Many inverters have a "search" or eco mode that pulses until a load appears, reducing idle draw.
- Run small loads on 12 V directly, and switch the inverter on only when needed. See the inverter guide.
- Check the datasheet's "no-load power" figure when buying.
7. Managing loads automatically
- Switched extension leads with a master socket turn off accessories when the TV goes off.
- Timers and smart plugs can switch off routers or chargers overnight if you don't need them (smart plugs draw a little themselves).
- On battery systems, a low-voltage disconnect or relay can shed non-essential loads. See the essential loads guide.
8. Frequently asked questions
How much does standby power cost?
Each watt left on all year uses about 8.8 kWh. Multiply by your electricity price to see the yearly cost.
Should I turn appliances off at the wall?
For TVs, consoles, chargers and computers, yes, if it doesn't affect updates or recordings. Leave fridges, alarms and boiler controls on.
Why is my battery going down overnight with nothing on?
Often an inverter left on, a fridge, or small loads such as monitors and USB sockets. Check the overnight draw on your battery monitor.
9. Sources
- GOV.UK, hidden costs of powering our homes: gov.uk
- OVO Energy, standby energy: how much electricity do your devices use when they're sleeping?: ovoenergy.com
- Octopus Energy, vampire devices debunked: octopus.energy
New to some of the terms? See the glossary. Not sure where to start? Try start here.