Ground-mounted solar panels
When ground-mounting makes sense, siting and orientation, frames and foundations, wind and snow, cable runs, earthing and protection, planning, security, and maintenance.
By Michael Johnson · Updated 18 November 2026 · How we check our guides
If your roof faces the wrong way, is shaded, listed or simply too small, solar panels on a frame in the garden, a field or beside a cabin can be the better option. Ground-mounted arrays can face due south (or north in the southern hemisphere), be tilted at the best angle, be cleaned and cleared of snow easily, and be extended later. They do need a solid frame, a safe cable route and, in some places, planning permission. This guide covers when ground-mounting makes sense, siting, frames and foundations, wind loads, cable runs, earthing and protection, planning rules, security, and maintenance.
1. When ground-mounting makes sense
| Advantages | Disadvantages |
|---|---|
| Best orientation and tilt | Uses garden or field space |
| No roof work or roof penetrations | Needs a frame and foundations |
| Easy to clean, inspect and clear snow | Long cable runs may need thick cable or trenching |
| Panels run cooler, so slightly more efficient | More exposed to theft, damage and shading from growing plants |
| Easy to expand | May need planning permission |
2. Siting and orientation
- Choose a spot with clear sky to the south (in the northern hemisphere), checking winter shading, when the sun is lowest.
- Steeper tilts suit winter production and shed snow; shallower tilts suit summer. Use the tilt angle calculator.
- Leave enough space between rows that one row doesn't shade the next in winter.
- Keep the array as close as practical to the batteries or inverter to shorten cable runs.
- Check for underground services before digging.
- Estimate output with the solar panel output calculator.
3. Frames and foundations
| Foundation | Notes |
|---|---|
| Concrete pads or footings | Strong and permanent |
| Ground screws | Fast, little concrete, removable |
| Ballasted frames (weighted) | No digging; needs a lot of weight |
| Timber frames | Cheap for small arrays; treated timber, and expect to replace parts over the years |
| Aluminium or galvanised steel kits | Durable; sized to panel dimensions |
Use stainless steel fixings and the panel maker's approved clamping zones.
4. Wind and snow
- A tilted panel acts like a sail. Frames and foundations must resist uplift as well as weight.
- Follow the frame maker's limits for wind and snow loads; in exposed places, get engineering advice.
- Keep the lowest edge high enough above the ground that snow sliding off doesn't bury it.
- See the storm season guide.
5. Cable runs
- Higher string voltages (panels in series) allow thinner cable over long runs. See the series and parallel guide.
- Bury cable in ducting at a suitable depth, or use armoured cable, and mark the route.
- Use UV-resistant solar cable above ground, clipped to the frame and protected from animals and strimmers.
- Size for voltage drop with the DC cable size calculator.
6. Earthing, isolation and protection
- Fit a DC isolator near the array and at the controller or inverter end.
- Earth or bond metal frames as the installation rules and maker require. See the earthing guide.
- Long cable runs in the open pick up lightning surges: consider surge protection. See the lightning and surge protection guide.
- Grid-connected installations must follow the electricity network's connection rules.
7. Planning
In England, stand-alone solar in the grounds of a house can be permitted development if limits are met. Under the rules in force from 27 August 2026 (Planning Portal summary):
- Area no more than 9 m².
- Height generally up to 4 m, but no more than 2 m within 5 m of the boundary, and 1 m if also in front of the main elevation of the house.
- Not within the grounds of a listed building or scheduled monument.
- Extra conditions in conservation areas and World Heritage Sites.
- A transition lets you use the earlier rules (including at least 5 m from the boundary and only the first installation) until 27 August 2027.
Wales, Scotland, Northern Ireland and other countries have different rules. See the solar planning permission guide and always check with your local planning authority.
8. Security, children and animals
- Use anti-theft bolts and mark panels.
- Protect cables from livestock, pets, rodents and mowers.
- Keep children away from connectors and cables; solar panels produce voltage whenever light falls on them.
- Fence large arrays.
9. Maintenance
- Cut back vegetation that grows up to shade the lower edge.
- Check frame bolts and foundations after storms.
- Clean panels when dirty. See the solar panel maintenance guide.
10. Frequently asked questions
Do I need planning permission for ground-mounted solar panels?
In England, a small array (up to 9 m²) in a house's grounds is often permitted development, with height limits near boundaries and extra rules for conservation areas and listed buildings. Check with your local planning authority.
Are ground-mounted panels better than roof panels?
They can face the ideal direction and angle and run cooler, but need space, a frame and cable runs.
How do I stop ground-mounted panels blowing over?
Use a frame and foundations rated for local wind loads: concrete footings, ground screws or adequate ballast.
11. Sources
- Planning Portal, stand-alone solar equipment in the grounds of a house or block of flats: planningportal.co.uk
- Planning Portal, changes to permitted development rules for domestic solar installations (August 2026): planningportal.co.uk
- Victron Energy community, effect of Voc on MPPT: victronenergy.com
New to some of the terms? See the glossary. Not sure where to start? Try start here.